72v electric bike sinewave controller
Specifications: Quick detail
- Voltage : 72v
- Warranty : 1 years
- Max current: 60 or 80amp
- Brake : low brake .
- Voltage range : 40-95V
- Mosfet : 24 mosfet
Programmable via computer
|
Max voltage
|
DC limiting current
|
Max phase work current
|
Programmable function
|
size
|
weight
|
|
90V
|
80A
|
200A
|
normal brake function
|
230mm x 145mm x 65m
|
1.8kgs
|
|
boost function or three speed
|
|
limited speed function
|
| slide recharge function |
| Rege.l braking function |
|
Throttle voltage
|
|
Automatic detection error
|
General Spec :
1. power supply:72V, MAX DC current:60 or 80Amp , Max phase current:250A
2. Product Size: 243x146x62mm
3. Net Weight:2.2 kgs
4. Testing way: Hall sensor
Features:
1. FOC-180︒sinusoidal drive controller applied to BLDCM or PMSM..
2. It takes only 3 minutes for the motor to be well matched on its best electronic angle at the first time.
3. The motor torque ripple will be reduced to the minimum, so as to ensure electric vehicle to run without any noise and vibration, smoothly, and comfortably.
4. The precise current ring can provide accurate torque input to meet the requirement 0f large torque output during vehicle starting and climbing.
5. The controller enjoys high efficiency due to space vector converter control algorithm which can effectively reduce the temperature rise of controller and extend battery life mileage
6. Built-in various protection: locked-rotor protection, over-current protection, overload protection, over-temperature protection, speed protection, over-voltage protection ,under-voltage protection and so on, effectively ensuring the safety of electronic control system and vehicle.
7. System status and fault intelligent management system can effectively monitor the current system operating mode external input state ,the case of system failure, and the LED flashes at the same time to facilitate the diagnosis and maintenance.
8. The rich peripheral interfaces: reverse, cruise, anti-theft, electronic brake, etc.
9. Parameter modifications and settings are available through online configuration with online computer
10. CAN BUS is optional to communicate with body instrument and BMS
Product Tags:
|
|
Low Brake Electric Bike Controller 72v Sinewave 60amp - 80amp Images
|
